Filming and lighting equipment

A variety of camera, lighting and environmental kit is available in-house to facilitate your shoot

A complete shooting package under one roof

Camera, lenses, sliders, jib, motion control. It’s all here and ready to go. Lighting is hung and ready, meaning setup times are drastically reduced, giving more on-camera time. Since the kit doesn’t need to go anywhere, the wrap is faster too.

Fixtures

 

ItemDetails
4ETC Source 4 26 degree, Series 3 Lustr X8DMX and Multiverse Wireless DMX
2ETC Source 4 Series 3 Fresnel Adapter with barndoorsDMX and Multiverse Wireless DMX
2Rosco RevPro Dual Gobo RotatorDMX control over dual gobos (Size B) for visual effects
ManyNumerous gobos for Source 4 Size BBreakup, water, linear breakup
2Aputure Nova P600Cwith 45 degree grid, DMX and CRMX Wireless
1Aputure Nova P300Cwith 45 degree grid, softbox, DMX and CRMX Wireless
1Aputure 1200D C/w FresnelDMX and LumenRadio Wireless
1Aputure 600D C/w 10″ FresnelDMX and LumenRadio Wireless
1Aputure 300D Mk2 C/w FresnelDMX
1Aputure 120D Mk2 C/w FresnelDMX
1Aputure 60D C/w Spotlight, gobos and IrisBluetooth
4Brother Pipelines 12″ 5600k
1Fibre Optic (5600k) Ultra Bright Flicker-free1000 FPS tested. DMX with tails on 7mm to 1.5mm
1Aladin M1 1×1 Bi-Colour
2Aputure MT Pro12″ RGBWW 36 Pixel tube light
1Aputure MC Pro 8 Kit8 light kit with CRMX
Flash lighting
4Bowens 500R StrobesPC Sync Cords and Pocket Wizards

 

Power

QTYItemDetails
3 Phase
163A 3 Phase TRS (3m)
163A 3 Phase TRS (5m)
163A 3 Phase TRS (10m)
232A 3 Phase TRS (5m)
232A 3 Phase TRS (10m)
Single Phase (16A)
1016A TRS (1m)2.5mm H07
1016A TRS (3m)2.5mm H07
1016A TRS (5m)2.5mm H07
1016A TRS (10m)2.5mm H07
1016A TRS (20m)2.5mm H07
Single Phase (32A)
232A TRS (1m)6mm H07
232A TRS (3m)6mm H07
432A TRS (5m)6mm H07
432A TRS (10m)6mm H07
432A TRS (20m)6mm H07
Single Phase (63A)
163A TRS (3m)16mm H07
163A TRS (5m)16mm H07
163A TRS (10m)16mm H07
Single Phase (13A)
813A TRS 4-Ways (10m)
413A 4-Ways (Misc Lengths)
213A 6-Ways (Misc Lengths)
Jumpers
613A Male to 16A female jumper (1m)2.5mm HO7 cable
416A male to 13A 4-way female jumper (1m)2.5mm HO7 cable
163A 3 Phase to 32A 3 Phase jumper (3m)
Distribution
316A Distro to 13A6 x 13A sockets, 1 x 16A 230V 3P Socket
232A Distro to 16A and 13A
4 x 16A and 2 x 13A Sockets, 1 x 32A RCBO and 4 x 16A and 2 x 13A MCB
163A Distro to 32A, 16A and 13A2 x 32A 3P 4 x 16A 3P 2 x 13A 230v outlets with RCBO
163A 3 Phase Distro (63A 400v Inlet Loop through, 2 x 32A 400v, 6 x 16A 230v Sockets)1 x 63A 400v 3P+N+E, IP67 6h Panel socket by Mennekes – Loop through (No protection). Power Socket Outlets: 2 x 32A 400v 3P+N+E, IP44 6h Panel socket by Mennekes 6 x 16A 230v P+N+E, IP44 6h Panel socket by Mennekes – Wired 2 Per Phase. 1 x Main 100A 4P Isolator switch by Doepke. Outlet Protection:
1 x 32A 4P MCB C curve by Doepke – Protects 32A 400v Socket
1 x 40A /30mA 4P RCD + 1 x 32A 4P MCB C curve by Doepke – Protects 32A 400v Socket
6 x 16A /30mA 2P RCBO Type A, C curve by Doepke – Protects 16A Sockets
1 x set of green phase neon indicators
1 x 8mm Earth Screw
316A Y-Splits (1 in, 3 out)
316A Y-Splits (1 in, 2 out)
2Powercon True 1 Splitter1 x T1 In and Passthru, with 4 x T1 Output. Scaff and Truss mounted
Powercon
3Powercon True1 (1m)
3Powercon True1 (3m)
3Powercon True1 (5m)
3Powercon True1 (10m)
213A male to True1 jumper (5m)
213A male to True1 jumper (10m)
216A male to True1 jumper (5m)
3Powercon True1 to 13A 4Way (5m)
2Powercon True1 to IEC (1m)
Control
4DMX 5 Pin 1m
4DMX 5 Pin 3m
4DMX 5 Pin 5m
4DMX 5 Pin 10m
4DMX 5 Pin 20m
2DMX 3 Pin to 5 Pin jumper (6 inch)
1DMX 5 Pin to 3 Pin jumper (6 inch)
3DMX Terminater (5 Pin)

 

Stands

 

QTYItemDetails
Wind ups
4Manfrotto 087NWB Wind Up c/w 100mm wheels (Black)Height: 1.65 – 3.8m, Max Load: 30Kg
Combo Stands
2Avenger A1045CS Roller 45Avenger A1045CS Combo Stand 45 Steel, Made of chrome steel, Top mounting: 28 mm (1 1/8 “) socket for TV spigots and 16 mm (5/8”) spigots, min. Height: 179 cm, max. Height: 450 cm, Transport height: 155 cm, max. load: 30 kg, max. Diameter footprint: 134 cm, Column tube diameter: 30, 35, 40, 45 mm, size legs: 25 x 25 mm, weight: 13.0 kg
2Avenger A5042CS Roller 42 (Low Base)A5042CS A5042CS Roller Stand 42 with Low Base, incl.braked wheels, Made of chrome steel, Topr mounting: 28 mm (1 1/8 “) socket for TV spigots and 16 mm (5/8”) spigots, min. Height: 166 cm, max. Height: 420 cm, Transport height: 142 cm, max. load: 40 kg, max. Diameter footprint: 150 cm, Column tube diameter: 30, 35, 40, 45 mm, size legs: 25 x 25 mm, weight: 15.4 kg
2Avenger A5036CS Roller 36 (Low Base)Avenger A5036CS Roller Stand 36 with Low Base, incl. braked wheels, Made of chrome steel, Top mounting: 28 mm (1 1/8 “) socket for TV spigots and 16 mm (5/8”) spigot, min. Height: 156 cm, max. Height: 360 cm, Transport height: 130 cm, max. load: 40 kg, max. Diameter footprint: 140 cm, Column tube diameter: 30, 40, 45 mm, size legs: 25 x 25 mm, Wheel type: A9000N, Weight: 13.6 kg
2Avenger A5034 Roller 34 (Folding Base)Avenger A5034 Roller 34 Folding Base; tripod with braked casters and foldable base; 4 sections / 3 extensions; riser tubes made of aluminum with diameter 45/40/35/30 mm; collapsible steel feet; max. load: 20 kg; Closed height: 132 cm; Max. Height: 340 cm; Min. height: 142 cm; Diameter footprint: 75 cm; Admission: 16 mm (5/8″) Male and 28mm Female; Weight: 10,7 kg
2Avenger A5012 Roller 12 (Folding Base)
2Avenger A1020B CS 20 Alu (Black)Avenger A1020B Combo Stand 20 Aluminum black; Aluminum tripod; 1x adjustable leg; 3 sections / 2 risers; Riser pipes with diameter: 45/40/35 mm; Max. Load capacity: 25 kg; Closed height: 93 cm; Max. Height: 198 cm; Min. Height: 110 cm; Base diameter: 80 cm;Attachment: 28 mm (1 1/8″) socket for TV spigot and 16 mm (5/8″) spigot; Color: Black; Weight: 4.9 kg
2Avenger A1020CS CS 20Avenger A1020CS Combo Stand 20 Steel; Steel tripod; 1x adjustable leg; 3 sections / 2 risers; Riser pipes with diameter: 45/40/35 mm; Max. Load capacity: 35 kg; Closed height: 93 cm; Max. Height: 198 cm; Min. Height: 110 cm; Base diameter: 80 cm;Attachment: 28 mm (1 1/8″) socket for TV spigot and 16 mm (5/8″) spigot; Color: Silver; Weight: 7,2 kg
2Avenger A1010CS CS 10Avenger A1010CS Combo Stand 10 Steel; Heavy duty tripod made of chromed steel; eveling leg to keep the tripod stable even on uneven ground; Attachment: 5/8 ” (16 mm) spigot and a 1 ”1/8 (28 mm) bushing; 2 sections with one excerpt; Max. Load: 30 kg; Maximum height: 100 cm; Closed height: 62 cm; Max. Diameter footprint: 57 cm; Weight: 4.2 kg
2Manfrotto 007BSUManfrotto 007BSU Stand – 124-325cm, 20kg load (6.7kg at max extension), one levelling leg. Weight: 7.3kg
Junior Stands
2Avenger A5029 Roller 29 (Low Base)Avenger A5029 Roller 29 with Low Base; incl. braked wheels, top attachment: 16 mm (5/8″) bolt, min. height: 125 cm, max. height: 290 cm, transport height: 123 cm, max. load: 12 kg, max. diameter footprint: 100 cm, Column tube diameter: 25, 30, 35 mm, size legs: 20 x 20 mm, weight: 5.7 kg
2Matthews Monitor Stand II (6.25′) Roller5/8″ Stud, 74-191cm. Load 31.8Kg
4Elinchrom Light-weight standsIdeal for Bowens strobes
2Manfrotto 007BSU Stand BKManfrotto 007BSU Stand – 124-325cm, 20kg load (6.7kg at max extension), one levelling leg. Weight: 7.3kg. Colour: Black
C Stands
6Avenger A2030DCBKIT C-Stand Kit (c/w 40″ flag arms, knuckle and detatachable turtle base)Avenger A2030DCBKIT C-Stand Kit 30 Detachable black; consisting of stand A2030, extension arm D520 and Grip-head D200, This system has a load of 10 kg and a maximum height of 3 m. The system can be disassembled and folded very space-saving, Techn. Data:, Attachment (Base): 28 mm, Attachment (column): 5/8 “16mm spigot, 1/1/8” 28mm spigot, Height min.: 134 cm, Height max.: 300 cm, Transport length: 134 cm, Load: 10 kg, Tripod tube diameter: 35, 30, 25 mm, Tripod legs: 25 mm, Base area: 95 cm, Sections 3 and excerpts 2, Material: Steel, Colour: black, Weight: 6.2 kg
2Avenger 40″ Flag Arm (Black)
6Avenger A2018FCB C-Stand 18″ (Black) with Turtle baseAvenger A2018FCB C-Stand 18 Bk, black Tripod, Legs folds flat for easy storage; Technical data:; Top mattachment: 5/8″ (16 mm) spigot; Height min.: 84 cm; Height max: 175 cm; Load: 8 kg, Tripod tube diameter: 35/30/25 mm, legs diameter: 25 mm, Base area: 95 cm, Material: Steel, Colour: black, Weight: 4.3 kg
6Avenger D500B 20″ Extension Grip Arm (Black)Avenger D500B 20″ Extension Grip Arm, Extension arm 51 cm, including grip head D200, for scrims and flags or small lights, technical data:, Arm length: 51 cm, Tube diameter: 16 mm, Colour: black, Material: steel and aluminum, Weight: 0.83 kg
6Avenger D200B Grip Head 2 1/2” (Black)Avenger D200B Grip Head 2 1/2” Bk; Top attachment: 16 mm (5/8 “) mounting; Material: Aluminum; Colour: Black; Dimensions (LxHxD): 18 x 6 x 9 cm; Weight: 0.55 kg
Booms
1Manfrotto 425B Mega BoomManfrotto 425B Mega Boom; Black aluminum mega boom arm, with a maximum length of 360 cm, cranks provide quiet and smooth movements, sturdy and durable, sandbag provides more stability (included), suitable for Manfrotto wind-up tripods for exact positioning, Techn. Data:, Attachment type: 16 mm / 28 mm, boom extension max .: 320 cm, boom extension min.: 50 cm, transport length: 220 cm, Load Capacity at maximum extension, Material: Aluminum, Colour: Black, Pipe diameter: 55 / 45 mm, Weight: 15 kg
1Avenger D650 Junior Boom ArmAvenger D650 Junior Boom Arm with Counterweight, Boom Arm with Counterweight, maximum extension: 300 cm; Safety load with a minimum extension of 163 cm: 40 kg; Safety load at maximum extension of 300 cm: 10 kg; Including counterweight of 6.7 kg; Attachment Bottom: 1 1/8 “(28mm) spigot; Top attachment: 1 1/8″ (28mm) socket & 5/8” (28mm) spigot; Material: Steel; Colour: Silver; Weight: 14.8 kg
1Avenger D600CB Mini Boom Arm (Black)Avenger D600CB Mini Boom Arm; Boom Arm with Built-In Grip Head and Sliding Attachment; Extends from 117 cm to a maximum of 212 cm; Load capacity: 7 kg @ Max Extension and 30 kg @ Min Extension; Uses a 16 mm (5/8″) in Welded Baby Spigot or Stud Attachment; Built-In D200 Grip Head for Superior Locking & Smooth Operation; Built-In Hook for Attaching Sand Bags for Counter-Balance; Use it with C-Stands (A2030D, A2033F, A2033L), rolling stands (A5029, A5036CS), combo stands (A1035B, A1035CS) and windup stands (B6030CS, B6026CS). Recommended Accessories: G200-1, G100-1, E200 if using the boom on a Combo or Wind-up Stand; Material: chromed steel; Colour: black; Weight: 3.7 kg
1Menace Arm KitFor 48.3mm tube (normal scaffold tube). Tube lengths up to 5m in the studio
1Manfrotto 085BSL Light BoomManfrotto 085BSL Light Boom; LIGHT BOOM 35 BLACK A25 W/O ST. Diameter35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at 230cm with 20kg of counter weight. Weight: 2.2kg, boom only. Dismantled length: 100cm. Assembled: 280cm. 6kg at maximum extension.
1Manfrotto 085BSLLIGHT BOOM 35 BLACK A25 W/O ST. Diameter35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at 230cm with 20kg of counter weight. Weight: 2.2kg, boom only. Dismantled length: 100cm. Assembled: 280cm. 6kg at maximum extension.
Weights
18Sand Bags (7Kg)
12Sand Bags (16Kg)
10Doughty T61100 TV Brace WeightDoughty T61100 TV Brace Weight, supplied with 29mm Receiver, Weight: 12,6 kg

Lighting grip, staging, clamps and clips

 

QTYItemDetails
Scaff, Truss & Staging
12x1m Alu Stage DeckScaffodling legs and braces, with wheels to vary working height
22×0.5m Alu Stage DeckScaffodling legs and braces, with wheels to vary working height
11x1m Alu Stage DeckScaffodling legs and braces, with wheels to vary working height
11×0.5m Alu Stage DeckScaffodling legs and braces, with wheels to vary working height
43m Ladder Truss (and joiners)Aluminium for lighting rigging and camera dolly (Dana)
12Aluminium Scaff Tube (500mm)
16Aluminium Scaff Tube (750mm)
12Aluminium Scaff Tube (1m)
4Aluminium Scaff Tube (2m)
2Aluminium Scaff Tube (3m)
2Aluminium Scaff Tube (5m)
16Castors for 48mm Scaff tube
2Scaff Joiner
20Global Truss 8231-B Swivel Coupler 50mm
Grip
4Magic Arm (Varible Friction)
20Super Clamps / K Clamps
6Sky Clamps
4Big Ben
1Matthellini Clamp with 3″ Center Jaw (Silver)
4Savage Gobo Head Clamp
1Frame Holder
4G Clamp
2Avenger Barrel ClampSilver w/T-Knob 42-52mm/1.65-2.04” Ø
2Avenger C150 C ClampAvenger C150 C-Clamp; Suitable for tube diameters from 28 to 78 mm; Load capacity: 10 kg with 16 mm attachment and 75 kg with 28 mm attachment; TÜV certified; Material: aluminum; Colour: Black; Weight: 1.6 kg
2Doughty Hanging Clamp
2Avenger D400B Jumbo Grip Head 4.5” (Black)Avenger D400B Jumbo Grip Head 4.5” black; turns a junior tripod into an overhead tripod; Includes a 10 mm Grip Head with a 28 mm (1 1/8 “) pin and a 28 mm (1 1/8”) socket; Material: steel; Colour: Black; Dimensions (LxHxD): 24 x 11 x 24 cm; Weight: 2.35 kg
1Manfrotto Scaffold / Truss Adapter
2Global Truss 814 Truss Support 100 kg
Clips and Clamps
8Plamps
10Large Spring Clips (Bessey)
10Medium Spring Clips (Bessey)
10Small Spring Clips (Bessey)
8Polyboard Floor Stands (for 2″ Poly)
3Polyboard holder (1″)
3Polyboard holder (2″)
2CA-106 Junior to Baby Pin Adapter
46″ Extension Arm with Spigot for Super Clamp
45/8″ Snap-In Pin for Super Clamps (Black)
2Impact Micro Clamp (1/4″ W Male)

 

Lighting Modifiers

QTYItemDetails
88×4′ Polyboard White / Black (2″ thick)
14×4′ Polyboard White / Black (2″ thick)
248″ X 48″ Gel Frame (Aluminium)
148″ X 48″ Floppy Black flag
148″ X 48″ Black flag
224″ X 36″ Black flag
218″ X 24″ Black flag
1Sunbounce Sunswatter 1.9m x 1.3m 2/3 Stop diffuser
44×4′ Eggcrate
Screens
2Virtual Production Material3m x 2m
1Magic Cloth10m x 2m
CSO
148″ X 48″ Floppy Blue flag (Ultra Blue CSO)
Softboxes and profiles
1Aputure Light Dome Mini IIAputure Light Dome Mini II; 21,5″ softbox; e.g. suitable for Aputure LS C120d (II), LS C120t, LS C300d (II); silver coating increases the reflection for better control of the light source; extremely round light due to double spreaders on each of the 16 steel rods; included in delivery: Light Dome Mini II softbox / gel holder / diffuser set (1x 1.5 stops, 1x 2.5 stops) / 40° honeycomb grid; dimensions (DxD): 55 x 29 cm; weight: 1.3 kg,
1Aputure Light Dome 150
1Aputure Light Dome IIAputure Light Dome II; 35″ Softbox; e.g. suitable for Aputure LS C120d (II) and LS C300d (II); silver coating increases reflection for better control of the light source; deep dome design (24″ deep) ensures a narrower, more focused light beam; extremely round light due to double spreads on each of the 16 steel rods; included in delivery Light Dome II softbox / gel holder / diffuser set (1x 1.5 stops, 1x 2.5 stops) / 40° honeycomb grid; dimensions (DiameterxD): 88.5 x 65 cm; weight: 2.3 kg;
1Aputure Latern
4Aputure Spacelight
1Aputure Light Box 30×120Aputure Light Box 30×120; rectangular softbox for Bowens mount lights; produces extremely soft light; four-sided design for easy guiding light; fast, simple design with four rods; front diffusers in two strengths (1.5 stops & 2.5 stops); 45° fabric grid; Techn. Data; softbox dimensions: 120 x30 x 40 cm (set up), 67 x 10 x 3 cm (folded); front diffuser dimensions: 120 x 30 cm each; inner wall dimensions: 65.5 x 20 cm; total weight: 1.08 kg; included in delivery: 1x Light Box 30×120 softbox, 1x inner wall, 1x 45° grid, 1x front diffuser (1.5 stops), 1x front diffuser (2.5 stops), 1x speed ring adapter, 1x carrying bag
1Aputure Spotlight (26 Degree)
1Aputure P300C SoftboxAputure Nova P300C Softbox; softbox suitable for the Nova P300C RGBWW LED softpanel; enlarges the area of the light source to 70 x 50 cm and thus softens the output; with 40° grid for controlling the light angle; incl. Speedring frame for attachment to the accessory slot of the Nova P300C; included in delivery: 1x softbox / 1x carrying bag / 1x 40° eggcrate attachment;1x holding frame / 1x diffuser (1/4 stop); dimensions softbox: 70 x 50 x 28 cm (in carrying bag: 50 x 34.5 x 6 cm)

Control

This allows control of lighting with Luminair or LightKey via laptop or any phone or iPad wirelessly.

QTYItemDetails
1ArtNet Node 8Ethernet and Wifi to DMX (8 Universes with RDM)
1Lumenradio CRMX Nova FX RDMWith RDM and 512 channels
1Multiverse ShowBabyWith RDM and 512 channels

Specialist Items

 

QTYItemDetails
1Dragonframe DMC16 Motion Controller
6Mark Roberts S3 Stereoscopic Slider for 3D timelapses
4Grow lights for plants
1Industrial humifier
1Filtered water supply to the studio floor for tank and aquatic work
4Thermostats and Hydrostats
4Convection Heaters
3Ultra Efficient IR HeatersWith remote control over Wifi
1Martin Smoke Machine
1Tour II HazerDMX 3 and 5 pin control
1Wind Machine 12″ c/w hook clampsDMX 3 and 5 pin control
3Table Top FanRemote control and pan / tilt autmation

Cameras and Grip

 

QTYItemDetails
1Sony F55 cameraGlobal shutter, 4k legend of a camera
1Nikon Primes Kit20mm, 35mm, 40mm, 50mm, 85mm, 110mm, 180mm
1Nikon Macro Kit70-180mm macro, 200mm macro, 60mm macro, 110mm macro, Laowa Ultramacro 2x-5x, micro scope objectives
1Mamiya 645 Sekor-C Primes KitIncluding Kippon Speedbooster to LPL
1Mamiya 645 Sekor-C Macro KitIncluding 3 x extension tubes, 2 x doubler
1Dana Dolly Kit6m of ladder truss or scaffold
11.2m SliderAtlas Slider
110′ Wave-2 Plus Telescopic Jib ArmJib arm with 100mm bowl and counter weights
1Tilta Follow Focus

Motion Control

QTYItemDetails
1eMotimo St4.3Motion Controller
3Macro Grantry (XYZ, Pan Tilt)2 x Linear rails and macro Pan / Tilt Head
4Time Ghost Motion ControllersNetworked control of advanced motion control for plants and long terms time lapses
6Plant Growth Motion Controllers (Custom build)3 Axes of motion, lighting relay and external triggering
1Dragonframe DMC1616 Axes of motion, fast and high torque
2400mm Linear RailVertical operation and horizontal. Worm Gear. Nema 17.
11000mm Limear RailFor Dana Dolly vertical rises. Worm Gear. Nema 17.
11200mm Rotating BeamNema 17, geared
1Macro TurntableNema 17
3TurntablesNema 17
3WinchesNema 17
1Dana Dolly Motion ControlNema 23
1Atlas Slider (1.2m) Motion Controled SliderNema 17
1Pan Tilt HeadVery heavy duty loads (e.g. 3D Beamsplitter rig)
1Pan Tilt HeadMedium duty loads
1Ladder DollyNema 23 and Nema 17 options

 

3D

QTYItemDetails
1Hurricane BeamsplitterMirror rig and side by side
1Transvideo 3D View s 12″ HDStereo monitor
6Mark Roberts S3 SliderStereo slider for timelapse and stop motion photography

 

Power

300 amps is available from 1 x 63A three phase and 3 x 63A single phase. Floor distribution takes it down to 32A, 16A and 13A, in single and three phase.

16A hard power is available along the studio wall for sensitive equipment that requires ‘always on’ and its MCB / RCBOs are on separate circuits, for example animal and plant husbandry.

Additional 13A sockets extend along the walls for domestic supply to personal effects such as laptops.

Lighting control 

The studio is installed with CRMX Lumenradio, Multiverse Wireless and hardwired with 8 DMX Universes available over Art-Net and sACN with RDM. The studio is equipped with LightKey for wireless control of all lighting.

Software

In-house the Studio has a suite of Apps commissioned especially to make your shoot more efficient. These apps revolve around time lapse shooting and subsequent image processing. All Apps run natively on Apple Silicone and are used routinely on major productions by BBC, Netflix, Disney and Apple. 

These Apps are not available to download and are unique to working in the Studio and with Robert Hollingworth.

 

Time Bandit

Automated processing of time lapse files creating organsied file / folder structure, renaming and movie creation into ProRes, Avid, h264, h265 in HD, 4k, 8K or higher, all in one app and in seconds

Image Bandit

Time saving EXIF processing aimed at scanned photos, to give them GPS co-ordinates, automated titles based on geography with look-up through Apple Maps, and correct EXIF and Finder metadata to enable Apple Photos and other Apps to see and organise them as if they were digital, enabling Memories to work as intended from old prints or scans from negatives or slides 

Serenity Stack Sorter

Automated processing of focus stacked image sequences or time lapses. The app will take a focus stacked set of files from a DSLR and organise them into frames and slices, performs renaming and re-organising. There is a file browser to see the time lapse in time and depth, and export ability to movies or Mini-Stacks

Time Ghost

Fully-fledged software and hardware combination to run time lapses in the studio, eg plant growth. The App can run numerous cameras with synced A and B camera, manages grow or bash lighting and has interval and focus ramping built in. Watched live in the timeline. Each hardware unit as 4 axes of stepper motion control

Taking the studio on location

Most equipment in the studio resides in wheeled flight cases.

From cable to distro, and production equipment to camera carts, they can all be wheeled onto a van relocating the efficiency of the studio to exterior locations or larger studios.